Quote Originally Posted by Altec Best View Post
Hi Mike,

All the info you need are in these threads.All the info you need should be here, but of course if you have any other questions. I would be happy to answer them..

I would use Solen Fast Caps 250v or 400v are fine..Leave the coils ! They very rarely ever go bad, and is a waste of money IMHO.. The parts you may have to source from 2 different places to get the correct values.. Like for the 3.9 Ohm resistors I had to get them at Madisound as Parts Express don't carry them.You may also have to use 2 different caps to reach a value like using 2 8 uF caps to reach a 16uF value..The hardest cap to find will be the 21uf so paralleling a 10 and an 11 uf cap maybe required.

New Member here..

New Model 19 owner - xover/foam questions

Okay, thanks for the reply and info. I'd read a couple of posts on a different site saying to avoid the Solens for the 19s as they sounded "gritty", but obviously experiences and opinions vary considerably. Thanks for the tip on Madisound as well.

Mike